Table of Contents
Advertisement
Section 5
Direct Network connection (PC)
• Double click on Network Connections in Start/Control Panel. Right click on the network adapter connected to your
Duality (likely to be called "Local Area Connection"). Select Properties.
• Select Internet Protocol (TCP/IP) and Properties.
• Next, configure the adapter as shown below:
Click on OK on both windows to save. Back in your network connection list, right click on your adaptor and ensure that
it is enabled. If it is disabled, the enable option will appear in the list. Click on enable.
Now physically connect the console as described opposite.
Duality Fuse Installation & Setup Guide
Setting Up Your DAW
Must match
the Duality IP
address
Page 37
Advertisement
Table of Contents
Need help?
Do you have a question about the Duality Fuse and is the answer not in the manual?
Questions and answers