B2 Intended Use - Devices; B3 Intended Use - Connecting Cables - Bicker Elektronik UPSI-IP-1 Series User Manual

UPSI-IP-1 Series
B2 Intended use – devices
These devices are primarily designed for use under difficult and extreme environmental conditions and can
be used both indoors and outdoors. They have been developed for professional use in areas such as industrial
control, communication and measurement technology. These products must not be used in devices or sys-
tems in which a malfunction leads to serious injuries or endangers human life.
Unlike the standard models of the UPSI series (Open Frame or DIN-rail mounting), the housing of the UPSI-
IP-1 series have IP65 / 67 protection. This means that the components mounted in the housing (UPS PCB and
energy storage) are completely protected against contact and dust (IP6x) as well as against water jets from any
direction (IPx5) and water penetration when temporarily immersed in water (IPx7).
For permanent underwater operation, the devices are expressly not suitable.
The devices are shock and vibration-proof and certified according to EN60068-2.
B3 Intended use – connecting cables
The connection cables included in the scope of delivery may only be used with the UPS devices in accordance
with the manufacturer's specifications.
The connection cables (type „ÖLFLEX® SMART 108" from the LAPP brand) are VDE approved control cables for
occasional flexible use and fixed installation under medium load conditions. They are also suitable for use in
dry, damp or wet areas. If using outdoors, observe the indicated temperature range and use with UV protec-
tion. They are largely resistant to certain oils at room temperature. They are suitable for occasional, non-auto-
mated movements. The maximum tensile load is 15 N/mm² of conductor cross-section during installation and
operation. Compulsory guidance is not permitted.
8
Revision 1