UPSI-IP-1 Series
CONNECTION DATA INPUT / OUTPUT (HOUSING)
Connector
Connector type
Design
Connection locking
Chassis-internal contact type:
Stranded wire to connectors
Mechanical service lifetime
Stranded wire size and cross section
internal
INPUT / OUTPUT (CABLE)
Connector
Connector type
Design
Chassis-internal contact type:
Stranded wire to connectors
Mechanical service lifetime
Tightening force / Torque
Type of cable
Cable construction
Outside diameter cable
Stranded wire cross section
Minimum bendig radius
Temperature range
Revision 1
Input
Flange plug
Pin (male), straight
Central screw
Screw clamp type
>500 plug cycles
Outward and downward stranded wires (Power): AWG16 (app. 1.5 mm²)
FE stranded wire: AWG18 (app. 1.0 mm²)
Input
Cable socket
Socket (female), straight
Screw clamp type
>500 plug cycles
0.5 Nm (tighten by hand)
ÖLFLEX® SMART 108 - PVC control cable, 3G2,5
Fine wire strands of bare copper; PVC conductor isolation, TI2;
Two-layer design, PVC, TM2; Colour: outside silver grey, inside black
8.1 mm
2x Stranded wire (Power): each 2.5 mm ²;
1x Stranded wire (FE) : 2.5 mm²
Occasional flexing: 15x outer diameter
Fixed installation: 4x outer diameter
Occasional flexing: –5 °C...+70 °C max. conductor temp.
Fixed installation: – 40 °C...+80 °C max. conductor temp.
V+ (1)
outer sheath
Output
Flange socket
Socket (female), straight
Output
Cable plug
Pin (male) , straight
Functional earth – FE
V– (2)
inner sheath
14
Need help?
Do you have a question about the UPSI-IP-1 Series and is the answer not in the manual?