Lever Removal Installation - Assa Abloy Corbin Russwin CL3500 Series Installation Instructions Manual

CL3500 Series
Cylindrical Lockset
Installation Instructions
5

Lever Removal Installation

Push / Turn Button
Plain Lever
Cylinder Lever
Interchangeable Core Lever
Rose
Corbin Russwin, Inc.
225 Episcopal Road
Berlin, CT 06037 USA
Phone: 800-543-3558
Fax: 800-447-6714
www.corbinrusswin.com
For installation assistance contact Corbin Russwin
1-800-607-5703 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2012, 2019, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
Lever Style
Release Hole
Lever
Assembly
Button
Release Hole
Lever
Assembly
Release Hole
Lever
Assembly
Key
Lever Catch
(Move in direction of arrow)
Lever
ASSA ABLOY is the global
leader in door opening solutions,
dedicated to satisfying
end-users needs for security, safety,
and convenience
Removal
Hold in button, push release
tool into release hole, remove
lever.
Push release tool into release
hole, remove lever.
Rotate key 45° clockwise
(from shed position). Push
release tool into release hole,
remove lever.
Lever
Key
Cylinder
Remove core and tailpiece
(page 6). Use flat blade
screwdriver to pull back lever
catch, remove lever.
Install
Push button in.
Slide lever on.
Make sure lever will not pull off.
Slide lever over lever catch.
Make sure lever will not pull off.
Insert key and rotate 45°
(from shed position).
Slide lever on.
Make sure lever will not pull off.
Slide lever over lever catch.
Make sure lever will not pull off.
FM237 03/19