Turn-Piece Installation; Coin-Turn Installation - Assa Abloy Corbin Russwin ML2000 Series Installation Instructions Manual

4
Turn-Piece
Installation
Strike Lip
5
Corbin Russwin
225 Episcopal Road
Berlin, CT 06037
Phone: 800-543-3658
Fax: 800-447-6714
corbinrusswin.com
Copyright © 2017 Corbin Russwin, Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written
permission of Corbin Russwin, Inc. is prohibited.
Patent pending and/or patent: www.assaabloydss.com/patents

Turn-Piece Installation

1. Install turn-piece loosely using two turn-
piece mounting screws. (Figure 26)
NOTE:
MAKE SURE LOCK IS UNLOCKED AND
TURN-PIECE IS ROTATED TOWARDS
LATCH . (FIGURE 27)
2. Adjust location of turn-piece on door until
turn-piece rotates easily, then fully tighten
MAKE SURE LOCK
mounting screws.
IS UNLOCKED
Un-Locked
Locked

Coin-Turn Installation

1. Install coin-turn using two surface mount
screws. (Figure 28)
Figure 27
Figure 26
Figure 28
For installation assistance contact Corbin Russwin
1-888-607-5703 • support@corbinrusswin.com
FM352 10/18