Securing The Child; Technical Data - NORAUTO 2274271 Safety Information Manual

Enhanced child restraint system
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 35
NOTE: Test by pulling on the enhanced child restraint system to ensure it is locked.
WARNING: If lap and shoulder belt portions of seat belt and seat belt buckle are not all correctly positioned, restraint is not properly
installed as a booster seat.

SECURING THE CHILD

WARNING: If your child is not properly secured in the enhanced child restraint system, they may be ejected in a crash, resulting in serious
injury or death.
1.
(For 76-105 cm):
Spread the 5-point harness straps apart.
2.
Place your child in the enhanced child restraint system in a seated position.
3.
The child should be seated against both the back and bottom of the seat with no gap behind the child. Do not allow the child to
slouch.
4.
(For 76-105 cm):
Gently guide the child's arms through the 5-point harness loops.
the shoulder straps height. Straps must be well fitted and not twisted!
5.
(For 100-135 cm): Pull the vehicle belt. Pull the vehicle belt. Route the lap belt portion under the armrests to the vehicle belt buckle.
Insert the 3-point vehicle belt in the buckle until you hear a click.
• An enhanced child restraint system positions your child so that the seat belt fits across the strong bones of the hips and pelvis and not
the abdomen, to protect your child from injury.
• The shoulder portion of the seat belt should be positioned over the chest and collarbone, staying between your child's neck and
shoulder so that it does not touch the neck.
CARE, CLEANING AND MAINTENANCE, STORAGE
• WARNING: It's dangerous to make any alterations or additions to the device without the approval of the Type Approval Authority, also
dangerous not to follow closely the installation instructions provided by the enhanced child restraint system manufacturer.
• WARNING: Do not attempt to disassemble the enhanced child restraint system further than these instructions allow.
• WARNING: All car seats expire. Plastic and metal parts wear out over time. Contact the manufacturer if you are unsure when your seat
expires.
• When the chair is not provided with a textile cover, the chair should be kept away from sunlight, otherwise it may be too hot for the child's
skin. Although, the enhanced child restraint system must not be used without the cover. The seat cover should not be replaced with any
other than the one recommended by the manufacturer. The cover constitutes an integral part of the restraint performance.
• Check regularly if everything functions properly.
• If any parts are torn, broken, or missing, stop using this product.
• DO NOT attempt to remove the foam under the seat pad.
• Keep the enhanced child restraint system clean.
• Do not use abrasive cleaning agents or hard objects during cleaning as these can damage the product.
• To clean the buckle: rinse using warm water. DO NOT use any soaps, solvents, or lubricants. Using anything other than water can cause
the buckle to malfunction. Air dry.
• Removable fabric covers and trims may be cleaned using warm water with a household soap or a mild detergent.
30
Wash in maximum 30 °C.
• Remove the enhanced child restraint system from the vehicle seat if not in use for a long period of time. Store the product in a cool, dry
place, protected from moisture and direct sunlight and somewhere your child cannot access it.
• Avoid placing heavy objects on top of the seat.
• It is normal for the fabric to colour from sunlight and to show wear and tear after a long period of use, even when used normally.

TECHNICAL DATA

Overall dimensions
(millimetre)
Net weight
Do not tumble dry.
Length
500
Width
440
Height
600-800
8.3 kg
Insert the buckle tongues into the buckle. Check
Do not bleach.
Do not iron.
440mm
Do not dry clean.
500mm
39
EN

Advertisement

Table of Contents
loading

Table of Contents