Other Information; Troubleshooting - Vivax 40S60T2S2 Instruction Manual

ENG

Other Information

Troubleshooting

If the TV does not operate as usual or appears to be faulty please read carefully this
section. Many operational issues can be resolved by users.
It is also advisable to unplug the TV from the AC socket on the wall for 60 seconds or more,
then reconnect and start again. This simple procedure helps in restoring stable conditions
for electric circuits and firmware of the unit.
Please contact Manufacturer Customer Care if the problem is unresolved or you have other
concerns.
SYMPTOMS
No sound or picture.
I have connected an
external source to my TV
and I get no picture
and/or sound.
When I turn On my
television, there is a few
second delay before the
picture appears. Is this
normal?
Picture is normal, but no
sound.
Sound but no picture or
black and white picture.
POSSIBLE SOLUTIONS
• Check if the power cord is plugged into a
powered AC outlet.
• A power switch on the right side bottom edge
of the front panel must be turned on. Press
the [POWER] button in the remote control to
activate the unit from Standby.
• Check to see if LED light is either red or blue.
If illuminated, power to TV is OK.
• Check for the correct output connection on
the external source and for the correct input
connection on the TV.
• Make sure you have made the correct
selection for the input mode for the incoming
signal.
• Yes, this is normal. That is the TV searching
for previous setting information and initializing
the TV.
• Check the volume settings.
• Check if Mute mode is set "on".
• If black and white picture first unplug TV from
AC outlet and re-plug after 60 seconds.
• Check that the Colour is set to 50 or higher.
• Try different TV channels.
45
VIVAX