Vivax 40S60T2S2 Instruction Manual page 194

VIVAX
ENG
Channel List
Press OK button to load channels from USB or to load channels into USB.
Software Update (USB)
Press OK button to update software from USB storage.
Factory Settings
Select reset by using ▲▼buttons to go to the factory settings and press OK button. To confirm the
warning menu press ◄ button.
HDMI CEC
The only one remote control can control the devices connected the TV via HDMI connection. (Satellite
receiver, DVD player). To activate this menu, press the OK button.
Advanced Settings
Select the advanced settings by
using ▲▼ buttons. When you press
the OK button, the password screen
is displayed. (This password is same
with the system lock password).
After you enter the password, you
can select the desired mode by using
▲▼ or ◄ ► and you can change the
settings of the mode by selecting OK
button in the menu.
Power Mode
When the power mode is set as "On", if you make power off and power on respectively, TV is turned on
by itself.
When the power mode is set as "Off", if you make power off and power on respectively, TV goes to
standby mode and you should press the "POWER" button to turn on the TV.
When the power mode is set as "Last", if you make power off and power on respectively, TV displays
the last screen before it turned off. It means that if the TV is "On" before it turned off, it will be on again
and vice versa.
41