Connection Instructions - Vivax 40S60T2S2 Instruction Manual

ENG

Connection Instructions

• Connecting an Aerial
To view television channels correctly, a signal must be received by the set from the
following source:
• An outdoor VHF/UHF antenna or Satellite Dish (option).
• Connecting HDMI
Supports digital connections between HDMI -enabled A/V devices such as (PVRs,
DVD, Blu-Ray, HD-DVD, AV receivers and digital devices). No sound connection is
needed for HDMI to HDMI connection.
►NOTE
Some devices such as a PVR or DVD players require a HDMI signal to be set to output in
the device's settings. (Please consult your device user manual for instructions.)
What is HDMI?
• HDMI, or high-definition multimedia interface, is a high resolution interface that enables
the transmission of digital audio and video signals using a single cable without
compression.
• "Multimedia interface" is a more accurate name for it especially because it allows
multiple channels of digital audio (5.1 channels).The difference between HDMI and DVI
is that the HDMI device is smaller in size, has the HDCP (High Bandwidth Digital Copy
Protection) coding feature installed, and supports multi -channel digital audio.
• Use the HDMI terminal for HDMI connection to a compatible device. If your external
device has DVI only, you should use a DVI-to-HDMI cable (or adapter) for the
connection, and the "R - AUDIO - L" terminal on DVI for sound output.
• Connecting Component Devices (DVD/PVR) Connect Component video and audio
cables to Component inputs ("Y"(Green), "PB"(Blue), "PR"(Red)) on the rear of your set
and the other ends to corresponding component video out connectors on the source
(PVR, DVD, etc)
The Y, PB and PR connectors on your component devices (PVR or DVD) are
sometimes labeled Y, B-Y and R-Y or Y, CB and CR. (Colours for inputs and cables
must correspond on both devices.)
►NOTE
Some devices such as a PVR or DVD player require a "Component/YPBPR" signal to be
set to output in the devices settings. (Please consult your device user manual for
instructions.)
• Connecting External A/V Devices
Connect a Video RCA cable to an appropriate external A/V device such as a VCR, DVD
or Camcorder.
Connect RCA audio cables to "R (Right/Red) - AUDIO - L (left/White)" and Video cable
with yellow connector to the "AV"(Yellow) input on the rear of your set and the other
ends to corresponding audio and Video out connectors on the A/V device.
• Connecting Digital Audio
Connect an Coax RCA audio device to this jack.
• Connecting Headphones
Headphones can be connected to the headphone output on the side of your set.
21
VIVAX