VIVAX
Using the Remote Control
•
Turning your TV on and off
Turning off to standby mode: Press [ ( | ) Power Standby] on the back RHS panel or on
the remote control to switch to standby mode. You can activate the unit again by
pressing [ ( I ) Power Standby].
Power indicator: Light indicates standby mode. There will be no light when the power
switch is in the off position.
►NOTE
Remove the connection from the wall power outlet if you do not intend to use the unit for
long periods, for example if you plan to be away a few days. Wait at least 5 seconds after
turning off if you want to re-start the TV.
•
Selecting the Input Source
Select the Input Source depending on the video device you have connected to your TV.
To select the Input Source: Press [Source] button. When the list of Input Source
appears, press [▲/▼] to select the source, then Press [OK] to connect.
•
Adjusting the volume
Press [VOL▲/VOL▼ ] to increase or decrease the volume.
Press [ MUTE ] to turn the sound off. Press [ MUTE ] again to turn the sound back on.
•
Changing channels
Press the [CH ▲/CH ▼] buttons to go to the next higher or lower channel. Or, Press
the number buttons to select a channel. For example, to select channel 12, press [1],
then press [2].
•
Selecting the sound mode
Press the [Sound Mode] button to select between 5 different pre-adjusted sound
modes: Standard, Music,Movie,Sports and Personal.
•
Selecting the picture mode
Press the [Picture Mode] button to select between 6 different pre-adjusted picture
modes: Standard, Cinema Day,Cinema Night, PC Game, Dynamic and Personal.
•
Selecting the aspect ratio
Press the [ASPECT] button to change the screen aspect ratio among Normal, 4:3,
Wide, Zoom and Cinema
► NOTE: The option of aspect is varry with different source.
•
Setting the sleep timer
You can specify how long you want your TV to wait for before it automatically turns off.
Pressing [SLEEP] button repeatedly will allow you to change the sleep timer mode:
Off,15Min, 30Min, 45Min, 60Min, 90Min, 120Min and 240Min.
•
Audio function
Pressing [ AUDIO ] button the TV screen will display the Audio options such as Stereo,
Dual I, Dual II, Mixed.
•
Displaying Channel List
Press [OK] to display the full list of digital and analogue channels available.
•
Electronic Programming Guide (EPG)
Provides convenient access to the television programs that will be available in the next
7 days. The information displayed by the EPG is made available by the commercial
television networks for digital channels only. The EPG also provides a simple way to
program the recording of your favorite programs. There is no need to setup complicated
timers.
22
ENG