Advertisement
PackshotCreator R3 Mark II
HARDWARE INSTALLATION
ACRYLIC PANEL INSTALLATION 1/2:
01
Remove the two white hand screws
holding the top light panel to the
top.
04
Remove the top.
02
Remove the top light panel from
the top by sliding it to the left and
take it off with caution.
05
Three acrylic panels come with the
system - one solid, one with an
opening at center and one with
a small hole at bottom. Choose
which two panels to use.
03
Remove the five white hand
screws.
06
Place the one with an opening
on either side for convenient side
loading. Slide the panels in from
the top through the two guide
notches / cut outs in the holding
bracket and front door.
Advertisement
