PackshotCreator R3L Mark II Quick Start Installation Manual page 6

PackshotCreator R3 Mark II
SYSTEM PLACEMENT
PLACEMENT:
01
Place the system on the floor. Make
sure the system is level and legs
are locked into position.
04
Place the system on
(Optional):
an PackshotCreator Supporting
Box (sold separately).
02
Place the system on
(Optional):
an PackshotCreator ErgoTable (sold
separately).
05
Any external lighting, such as
PackshotCreator LiveStudio light,
can be used with the system when
some or all of the top, two side
walls, acrylic panels, front door
and two front light columns are
removed.
03
Place the system on
(Optional):
an PackshotCreator ErgoTable+
(sold separately).