Advertisement
PackshotCreator R3 Mark II
HARDWARE INSTALLATION
CABLE CONNECTION 1/2:
01
Plug one end of the power cable
into the system and the other end
into a power socket.
04
Plug it into the port on the top
of the back light panel. Rotate
clockwise to tighten.
02
Plug one end of USB Type B cable
into the system and the other end
into a computer USB port.
05
Connect a compatible camera to
your computer by USB.
Instead of batteries,
(Optional):
we recommend using an AC power
adapter to power your camera.
03
String the top light power cable
through the ceiling hole.
06
(Optional Connections):
almost all SLR cameras featuring
remote capture capabilities,
PackshotCompact can supply a
custom shutter release cable to
connect the camera to the system
so software can automate image
capture.
For
Advertisement
