Advertisement
PackshotCreator R3 Mark II
COMPONENT REPL ACEMENT
ACCESS AND REMOVE THE CORNER LAMP 2/2:
07
Lift to remove the column.
ACCESS THE BOTTOM LAMP:
01
Remove the 2 small diusion plates
on the front of the machine.
08
When re-installing the
Note:
columns, be sure to align the screw
with the small corner hole.
02
Remove the translucent turntable
platform.
09
Then, tuck the connector and extra
wire into the large hole.
03
To remove the glass turntable, hold
onto the glass edge and push it
towards the motor to lift it away
from rollers and idlers then remove
completely.
Advertisement
