Advertisement
PackshotCreator R3 Mark II
COMPONENT REPL ACEMENT
ACCESS AND REMOVE THE CORNER LAMP 1/2:
01
Unplug the studio and the top light
power cable.
04
Lift to remove the diffusion plate.
02
Follow instructions from steps 01-
04 in the "Acrylic Panel Installation"
part of this document to remove
the top and top light, and then
remove the acrylic panels if any.
05
Disconnect the connector for the
LED lamps.
03
Lift to remove both side walls and
front door.
06
Remove the hand screw.
The hex socket button
Note:
screws do not need to be
removed.
Advertisement
