Advertisement
PackshotCreator R3 Mark II
HARDWARE INSTALLATION
CABLE CONNECTION 2/2:
07
In this configuration, captured
images are saved to the memory
card.
10
If you are using AC
(Optional):
power adapter, plug it into the
power socket on the top of the
back light panel.
08
If you are using camera top shot,
plug the USB cable from your
camera to your computer directly,
or into the USB port on the top of
the back light panel first.
11
Flip the system power switch on.
09
Respectively, plug one end of the
USB Type A cable into the left side
of the back light panel and the
other end into your computer USB
port.
12
Press the metal button switch to
turn on the system.
Advertisement
