Advertisement
Manufacturer
Manufacturer
Voltage Range
Nominal Power
Connections
Temperature (tc)
The light source contained in this luminaire shall only be replaced by the manufacturer, or his
agent, or a similar qualified person.
NOTE! The light source is non-user replaceable.
NOTE: LED= Light Emitting Diode
LABELING EXPLANATION:
X: Self contained
0: Non Maintained (*)
A: Including test device
B: Including remote rest mode
C: Including inhibiting mode
*90 : 1.5 hour duration
180: 3 hours duration
Address module connections
11 Connect the address cables, in the terminal block with the indicating polarity (Fig.2).
12 Address the luminaire by using the dip-switches with the appropriate combinations as you
can see in pages 5 and 6 (Fig.3).
11
+L -L
L
L
Page 4 from 7
LED MODULE CHARACTERISTICS
GRL-37/90/ADR
Cable connection between main pcb and led module
L
Fig.2
Olympia Electronics S.A.
1005183
17.1-18.6V DC
11W
65 °C max. across the board
(*)Non Maintained operation: The luminaire
lights its illumination source, only in power
supply's failure.
Maintained operation: The luminaire lights its
illumination source, when it is powered by the
mains power supply or not.
GR-6500 Loop
L
Fig.3
GRL-37/180/ADR
12
923037008_09_001
Advertisement
