Table of Contents
Advertisement
4.
One after the other, push the two halves to the center
of the bed and ensure the side tubes are properly
aligned and connected.
5.
Release the free ends of the actuator cables from
the clips.
6.
Fold the seat section down to lock the two halves of
the mattress support platform together.
1657009-A
7.
Detach the control unit by pushing it up and sliding it
towards the foot end of the bed.
8.
On the control unit turn the lock 90 degrees
counter-clockwise to open the lid and remove it.
9.
Connect the actuator cables C, D and E to the
control unit, according to the color coding and
symbols.
10.
Put the lid back on the control unit and close it by
turning the lock 90 degrees clockwise.
Transportation and Storage
15
Advertisement
Table of Contents
