3.
Pivot the short lifting mechanism up to a vertical
position and lift it off by holding on the two square
tubes A and E.
4.
Pivot the long lifting mechanism up to a vertical
position and lift it off.
5.3 Assembly of base
NordBed Optimo and NordBed Optimo Wide 105 cm only
1657009-A
1.
Mount the long lifting mechanism by fitting the axles
in the yellow marked cut-outs on the corner brackets
of the base frame.
The lifting mechanism should be lowered
almost vertical only leaning slightly towards
the center of the bed.
2.
Pivot the lifting mechanism down and let it rest on
the floor
3.
Mount the short lifting mechanism by fitting the axles
in the green marked cut-outs of the corner brackets
on the base frame.
The lifting mechanism should be lowered
almost vertical only leaning slightly towards
the center of the bed.
Transportation and Storage
13