Maintenance Operations To Be Carried Out By The User - OREC HR662 Instruction Manual

MAINTENANCE OPERATIONS TO BE CARRIED OUT BY THE USER

DANGER
BEFORE perform any maintenance operation on the machine,
cut off the engine, and remove the spark wire from the sparking
plug
If maintenance operation is not realized, damages can occur to the
machine and personnal injuries to the user and/or spectators. These
damages and injuries will not be covered by the warranty.
Daily maintenance will be performed by the user.
Maintenance operations for first 20 hours, 100 and 300 should be
realized by the dealer.
Ask your dealer to check the machine if you meet some problems.
Figure 9
Ask your distributor the name of your dealer.
D ,
AILY MAINTENANCE BEFORE START MOWING
Transmission oil level : check by the gauge (1 Figure 9). Oil
level should appear in the hole.
Gear Oil : SAE90 or API GL-5
Gear Oil Quantity : 1.60L
Figure 10
Transmission oil replacement
First : 20 hours. Later : each 100 hours or every year whichever comes first.
FUEL (FIGURE 10)
Check tank level is full before start to work.Check that tank cap is fully closed, and check for leaks.
Use only a good quality unleaded gasoline.
DANGER
Check fuel tank is closed, wipe fuel spillages before start the machine. Check there is no fire,
electric sparks, cigarettes near the machine when refuelling.
Tires (Figure 11)
Check tires are not cutted, cracked or worn.
Check tires pressure : 1,4 bar rear.
Figure 11