Maintenance Operations To Be Carried Out By The User - OREC HR531 Instruction Manual

MAINTENANCE OPERATIONS TO BE CARRIED OUT BY THE USER

BEFORE performing any maintenance operation on the machine, stop the engine, and remove
the spark wire from the sparking plug.
If maintenance operation is not realized, damages can occur to the machine and personnal injuries to
the user and/or spectators. These damages and injuries will not be covered by the warranty.
•Daily maintenance will be performed by the user.
•Maintenance operations for first 20 hours, 100 and 300 should be realized by the dealer.
•Ask your dealer to check the machine if you find some problems.
•Ask your distributor the name of your dealer.
D ,
AILY MAINTENANCE
Transmission oil level : Loosen the bolt of the oil gauge (1 Figure 8), if
the level is correct, the oil level should appear in the gauge.
Transmission oil replacement
•Gear Oil : SAE90 or API GL-5
•Gear Oil Quantity : 1.60L
Put a container under the right side of the transmisson to receive old oil,
remove the drain plug (3 Figure 9).
Then, fix the drain plug (3 Figure 9).
Put the oil from the oil cap (2, Figure 8)
Oil Exchange Frequency
First : 20 hours
Later : each 100 hours or every year whichever comes first.
FUEL (FIGURE 10)
Check tank level is full before start to work.Check that tank cap is
fully closed, and check for leaks. Use only a good quality unleaded
gasoline.
Check fuel tank is closed, wipe fuel spillages before start the machine. Check there is no fire,
electric sparks, cigarettes near the machine when refuelling.
BEFORE START MOWING
DANGER
DANGER
2
Figura 8
3
Figura 9
Figura 10
1