Epygi Quadro 2x Installation Manual page 7

Quadro Manual I: Installation Guide
Step 1: Installing the Quadro
Quadro.
Step 2: Configuring the Quadro
the Quadro into your network environment.
Please Note:
basic networking configurations. For more complex network environments, please re-
fer to the Quadro Administrator's Guide.
Step 2-A: Using ISDN Lines
Step 2-B: Using an ADSL or G.SHDSL Uplink
needed if using a Quadro IP PBX with an ADSL Internet Uplink
Step 3: Registering on Epygi's Technical Support
Technical Support Center and the Epygi SIP Server.
Step 4: Making/Receiving Calls
features.
Appendix: PC DHCP Settings
Configuration GUI.
Appendix: Changing the Admin Password
tor password.
Appendix: Configuring NAT Traversal
behind a NAT enabled router.
Appendix: Configuring the Epygi SIP Server
SIP server.
Appendix: Checking the Connections
Quadro2x, 2xi, Quadro4x, 4xi, 4xa, 4xia, 4xs, 4xis, Quadro16x, 16xi, 16xa, 16xia, 16xs, 16xis; (SW Version 3.0.x)
explains the connection of cables and devices to the
describes the configuration steps necessary to integrate
The Quadro configuration described in this Installation Guide explains
explains how to define a default outgoing MSN
explains how to enable the Quadro's various telephony
explains how to configure your PC to access the Quadro
explains the additional WAN specifications
shows you how to access the Epygi
explains how to change the default administra-
explains configuration of the Quadro if it is placed
explains how to work with Epygi's powerful
gives hints on solving common problems.
About This Installation Guide
6