Reset Submenu; Exit Menu; Picture Adjustments - Extron electronics DDS 402 User Manual

Digital display scaler
Hide thumbs Also See for DDS 402:
Table of Contents

Advertisement

im Vertrieb von
Operation, cont'd

Reset submenu

The Reset submenu resets the DDS 402 to the default values. Reset the scaler by
Unit Reset to
Factory Defaults

Exit menu

From the Exit menu (figure 3-9), press the Next button to return to the default
display cycle, or press the Menu button to return to the Input Configuration menu.
Advanced
Configuration
Figure 3-9 — Exit menu flowchart

Picture adjustments

The picture adjustments allow you to fine tune the image quality of the selected
input. When one of the Picture Adjustments buttons (Center, Size, Brightness and
Contrast, Zoom, or Detail) is pressed, the corresponding image adjustment menu
appears on the LCD screen. Adjustments can then be made by rotating the
Adjust
volatile memory; when the scaler is powered down and powered up, the settings
are restored.
Adjust an image for centering, sizing, brightness, contrast, color, tint, zoom, or
detail as follows (figure 3-10):
Horz
Figure 3-10 — Picture adjustments flowchart
1.
www.camboard.de
3-10
Digital Display Scaler • Operation
CAMBOARD Electronics
pressing and holding the Freeze button while this submenu is
active. The LCD displays Unit Reset to Factory Defaults when the
reset is complete. Release the Freeze button.
Display
Cycle
NEXT
Exit
MENU
Menu
knob or the Adjust
knob. Picture adjustment settings are stored in non-
Power
on
CENTER
SIZE
Cntr Vert
Horz
Size Vert
Brt
001
Press the appropriate picture adjustment button: centering (Center), sizing
(Size), brightness and contrast (Brt/Cont), zoom, or detail. The LCD display
shows the name of the adjustment and the value of the current setting.
Tel. 07131 911201
Fax 07131 911203
Input
MENU
Configuration
Extron
60-426-01
DDS 402
2 sec.
Version x . xx
BRT/CONT
ZOOM
Cont
Zoom
Horz Filter Vert
000
001
The Adjust
knob and the Adjust
NOTE
used to adjust the image settings on the left and
right sides of the LCD screen, respectively.
ce-info@camboard.de
Display
2 sec.
Cycle
DETAIL
000
10 sec.
timeout
knob are

Advertisement

Table of Contents
loading

Table of Contents