Ameriphone VCO Operating Instructions Manual page 22

IMPORTANT SAFETY
Special Features
INSTRUCTIONS
3. When prompted with "GA" on
the display, voice the number
you're calling. (In some areas,
you may only provide calling
information by text.)
4. When the call is connected, read
incoming messages on display
screen and start speaking when
you see "GA". Voice your
conversation through the handset
and be sure to say "go ahead"
when you're finished speaking
and it's the other person's turn
to talk.
5. Continue your conversation by
reading and talking.
6. Hang up the handset when you
are finished.
If your relay service has a
common phone number for both
voice and TTY/TDD calls, you can
provide calling information by
either voice or text:
Provide Calling Information by
Voice:
1. Dial from keypad or from
RELAY memory.
RELAY
POWER
M1
a. a.
b b
Figure 29 - RELAY button
2. The CA answers in voice
(you can tell from the
flickering of the signal
indicator). Speak into the
handset and tell the CA that
you are a VCO user and
give the CA all the calling
instructions. Repeat the
information one more time to
ensure the CA received all
of the instructions.
ELAY REL MGS AUTO ANS
M2 M3
Figure 30 - Signal Indicator
REL MGS AUTO ANS
X
M2 M3
a. a.
b b
SIGNAL
BACKSPACE SPACE
LED
M4 M5
M4
19