Ameriphone VCO Operating Instructions Manual page 18

IMPORTANT SAFETY
Special Features
INSTRUCTIONS
Making Emergency VCO Calls
with voice
1. Dial emergency number 911.
2. When number answers,
signal light flashes.
3. Say your name, address and
the help needed.
Making Emergency VCO Calls
with text and Sending Emergency
Message
1. Lift handset.
2. Dial the emergency number if it
has not been programmed into
(see previous section).
3. Press
M2 M3
a. a.
b. b.
Figure 23 - EMERGENCY Button
.
M4 M5
a. a.
b. b.
SELECT MEMORY b
A
D
B
E
C
F
4. The VCO phone dials the
emergency number (if
programmed) and transmits
this present message: "HELP! I
AM A VCO USER, PLS
RESPOND BY TYPING ON A
TTY, AND LISTEN TO ME ON
UR PHONE, (your name),
(your address), (your number)
GA".
5. This message will re-transmit
every few seconds.
6. The message will stop when it
starts receiving the typed
message from the dispatcher.
Or, you can stop and start the
message by pressing
7. Continue conversation by
reading and talking.
Memory dialing the emergency
service and the emergency
message feature are provided
only as a convenience.
Ameriphone assumes no
responsibility for customer reliance
upon these features.
.
15