Wall Mount - Ameriphone VCO Operating Instructions Manual

Setting up Your VCO
Line Cord
Figure 4 - Connecting the Components
3. Lift the handset and listen for a
dial tone.
The phone is ready to use.
For Wall Mounting
1. Slide the handset hook out of
the base as shown in Figure
6 and reverse its position so
that the hook points up and
will hold the handset when
you hang up.
Figure 5 - Reversing the Hook
8
Handset
(Curly)
Cord
AC Adapter
2. Insert the tabs of the phone
base into the slots in the
lower position of the base as
shown in Figure 7. Push the
mounting bracket in and
down firmly until it snaps into
place.
Figure 6 - Mounting Bracket
for Wall Mounting
3. Locate a desired wall phone
jack near an AC outlet and
hold phone upright.
4. Plug the short phone line
cord into the wall outlet as
shown in Figure 8.
Figure 8 - Wall mounting installation