Table of Contents
Advertisement
IndraDrive Mi Drive Systems with KCU02, KSM02,
KMS02/03, KMV03, KNK03, KLC03
Balancing with the complete key
Output shaft with shaft sealing ring
1
Key
2
Keyway
3
Motor shaft
4
Centering hole
Fig. 7-24:
Output shaft with key
The machine elements to be driven additionally have to be secured in the
axial direction via the centering hole on the end face.
NOTICE
Preferably use plain output shafts.
The motors have been balanced with the complete key. This means that the
machine element to be driven has to be balanced without a key.
Modifications to the keys may be made only by the users
themselves and on their own responsibility. Rexroth does not
provide any warranty for modified keys or motor shafts.
The motors have been designed with radial shaft sealing rings according to
DIN 3760 ‑ design A.
Notes on project planning
Damage to the shaft! In case of intense
reversing duty, the seat of the key may wear
out. Increasing deformations in this area can
then cause the shaft to break!
R911335703_Edition 04 Bosch Rexroth AG
249/407
Advertisement
Table of Contents
