Installation Position; Operation With Axial-Piston Motor (If Included In The Scope Of Supply); Required Tools - Bosch Rexroth MOBILEX GFT-W 30 Series Operating Instructions Manual

30/86 Assembly
Bosch Rexroth AG
, MOBILEX GFT-W general operating instructions series 30, RE 79100-01-B/11.2020

7.3 Installation position

The installation position of the planetary gearbox is horizontal.
The planetary gearbox installation position approved and recommended by
Rexroth is indicated on the drawing in appendix D "Technical data / Drawings"
of the material number-specific operating instructions.
Installation of the planetary gearbox in a non-approved Rexroth mounting
position!
Damage or failure of the planetary gearbox and expiry of the warranty!
Only install the planetary gearbox in an approved Rexroth mounting position

as indicated in the dimensioned drawing in appendix D "Technical data /
Drawings" of the material number-specific operating instructions.
Damage to the planetary gearbox through misalignment with the equipment frame
or winch base/cable drum!
Property damage!
Do not tilt the planetary gearbox during installation and insert it into the

equipment frame or winch base/cable drum torsion-free and tension-free.
Avoid misalignment of the planetary gearbox during installation.

Align the planetary gearbox exactly with the drill rig or winch frame / rope

drum.

7.3.1 Operation with axial-piston motor (if included in the scope of supply)

Strictly observe the instructions of the axial-piston motor operating

instructions. You will find these in appendix C "Mounting parts" in the material
number-specific operating instructions of the planetary gearbox.

7.4 Required tools

The planetary gearbox can be assembled with standard tools. No special tool is
required.
NOTE