User Interface - ST STM8S User Manual

UM0671
2.3
Note:
Figure 3.
Menu entry point
**Menu**
Help push
(1)
down
Exit sub-menu
Scroll left
Enter sub-menu
K1 K2 K3 K4 K5
Slider Bar: = = = = = = = =
1
1. After power on, to quickly display the key and slider states (display option 1), move the joystick once to the right (→ ) and
twice towards the bottom (↓ ).
Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from

User interface

The joystick is the main user interface used to display keys values and state or to modify the
main touch sensing library parameters: de-bounce filter, detection time-out, low power
mode, DES setting, etc.
The 5 touch sensing keys are also for navigating through the touch sensing menu.
Navigation scheme
**Menu** **Menu**
Key info Detect
TIMEOUT
Detect
TIMEOUT
00 sec
Scroll right
1
Parameter
setting
sub-menus
**Menu** **Menu**
Sel Key Select Key X
summary
STATE Key X
Idle or Detected
2
Display
sub-menus
Getting started with the touch sensing evaluation kit
**Menu** **Menu**
De-bounce Low Power
Filter Mode
De-bounce
Filter
3
2
Low Power
Mode
128 mSec
3
Noise rejection
KeyX Sig=0x0184
Counter KeyX
KeyX Ref=0x015E
0000
4
3
Counter
RESET
Decrement
Resolution
Doc ID 15330 Rev 4
**Menu** **Menu**
DES Setting About
DES Setting
Disable
4
STM8S Touch
Eval Vx.x.x
**Menu**
Select slider
Slider STATE
S Sig=0x92
Idle or Detected
S Pos=0x09
5
S Resolution
x bits
7
< Resolution < Increment
x bits Resolution
6
5/23