Table of Contents
Advertisement
Removing the CLP
To remove the CLP, do the following:
Configuration hazard – risk of data loss
After uploading or downloading a file, allow at least twenty seconds before
removing the CLP to ensure the data has been fully transferred.
1.
2.
RUGGEDCOM RST916C
Installation Manual, 04/2021, C79000-G8976-1490-03
NOTICE
Remove the CLP (or blank insert) from the CLP port. If needed, insert a flat head
screwdriver between the CLP and the chassis to gently pry the CLP out.
2
1
Blank Insert
1
CLP
2
Figure 3.1
Removing the CLP
NOTICE
Contamination hazard – risk of dust and dirt entering the CLP slot
When the CLP is not installed, make sure a blank insert (provided with each
device) is installed in its place.
Insert a blank insert or a new CLP.
Device Management
3.3 Inserting/Removing the CLP
21
Advertisement
Table of Contents
