Endress+Hauser Levelflex M FMP41C Operating Instructions Manual page 46

Guided level-radar

Hide thumbs Also See for Levelflex M FMP41C:

Table of Contents

Operation

5.5.8

Endress+Hauser operating program

The operating program FieldCare is an Endress+Hauser Plant Asset Management Tool based on

FDT technology. You can use FieldCare to configure all your Endress+Hauser devices, as well as

devices from other manufacturers that support the FDT standard. Hardware and software

requirements you can find on the internet:

www.endress.com È select your country È search: FieldCare È FieldCare È Technical Data.

FieldCare supports the following functions:

•Online configuration of transmitters

•Signal analysis via envelope curve

•Tank linearization

•Loading and saving of device data (upload/download)

•Documentation of the measuring point

Connection options:

•PROFIBUS PA via segment coupler and PROFIBUS interface card

•Commubox FXA291 with ToF Adapter FXA291 via service interface

Menu-guided commissioning

Levelflex M FMP41C PROFIBUS PA

L00-FMP4xxxx-20-00-00-en-001

Endress+Hauser

Table of Contents

Need help?

Do you have a question about the Levelflex M FMP41C and is the answer not in the manual?