Siemens Sinamics S120 Manual page 34

System overview
2.4 Standards
Standards* Title
EN 60269-1 Low-voltage fuses;
IEC 60269-1 Part 1: General requirements
DIN EN 60269-1
VDE 0636-1
IEC 60287-1 to -3 Cables - Calculation of the current carrying capacity
Part 1: Current carrying capacity equations (100 % load factor) and calculating the losses
Part 2: Thermal resistance -
Part 3: Main sections for operating conditions
HD 60364-x-x Erection of power installations with nominal voltages up to 1000 V;
IEC 60364-x-x Part 200: Definitions
DIN VDE 0100-x-x Part 410: Protection for safety, protection against electric shock
VDE 0100-x-x Part 420: Protection for safety, protection against thermal effects
Part 430: Protection of cables and conductors for overcurrent
Part 450: Protection for safety, protection against undervoltage
Part 470: Protection for safety; use of protection for safety
Part 5xx: Selecting and erecting electrical equipment
Part 520: Cables, conductors, busbars
Part 540: Grounding, protective conductor, potential bonding conductor
Part 560: Electrical equipment for safety purposes
EN 60439 Low-voltage switchgear assemblies;
IEC 60439 Part 1: Type-tested and partially type-tested assemblies
DIN EN 60439
VDE 0660-500
EN 60529 Degrees of protection provided by enclosures (IP code)
IEC 60529
DIN EN 60529
VDE 0470-1
EN 60721-3-x Classification of environmental conditions
IEC 60721-3-x Part 3-0: Classification of environmental parameters and their severities; Introduction
DIN EN 60721-3-x Part 3-1: Classification of environmental parameters and their severities; Long-term storage
Part 3-2: Classification of environmental parameters and their severities; Transport
Part 3-3: Classification of environmental parameters and their severities; stationary use, weather
protected
EN 60947-x-x Low-voltage switchgear
IEC 60947 -x-x
DIN EN 60947-x-x
VDE 0660-x
EN 61000-6-x Electromagnetic compatibility (EMC)
IEC 61000-6-x Part 6-1: Generic standard; Immunity for residential, commercial and light-industrial environments
DIN EN 61000-6-x Part 6-2: Generic standards; Immunity for industrial environments
VDE 0839-6-x Part 6-3: Generic standards; Generic standard emission for residential, commercial and light-
industrial environments
Part 6-4: Generic standards; Generic standard noise emission for industrial environments
EN 61140 Protection against electric shock; Common aspects for installation and equipment
IEC 61140
DIN EN 61140
VDE 0140-1
EN 61800-2 Adjustable-speed electrical power drive systems;
IEC 61800-2 Part 2: General requirements - Rating specifications for low-voltage adjustable frequency a.c. pow-
DIN EN 61800-2 er drive systems
VDE 0160-102
34
Liquid-cooled chassis power units
Manual, (GH7), 11/2016, 6SL3097-4AM00-0BP7