Admin Setup - Microcom 360C Operator's Manual

BG SETTING
DRUM CLEANING
HIGH HUM. MODE
NARROW PAPER SPEED

ADMIN SETUP

The settings for the administrator of the machine. A password is required to enter this menu.
Item
Password
NETWORK ENABLING DEFAULT
SETUP GATEWAY
WIRED
TCP/IP
NETBIOS OVER TCP
IP ADDRESS SET
IPV4 ADDRESS
SUBNET MASK
GATEWAY ADDRESS
DHCPV6
WEB
TELNET
FTP
IPSEC
Item
Setting
******
WIRED
WIRELESS
(INFRASTRUCTURE)
ENABLE
DISABLE
ENABLE
DISABLE
ENABLE
DISABLE
AUTO
MANUAL
xxx.xxx.xxx.xxx
◆
With a cable attached
169.254.XXX.XXX
◆
Without a cable
attached
192.168.100.100
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
ENABLE
DISABLE
ENABLE
DISABLE
ENABLE
DISABLE
ENABLE
DISABLE
DISABLE
Setting
0 Corrects uneven printing due to differences
+1 in the print density/print frequency or
+2 temperature/humidity. Change this value when
+3 the background is dense.
-3
-2
-1
ON Set ON to reduce white horizontal streaks that
OFF appear in the print results. The lifetime of the
image drum unit is shorter when this is set to
ON.
OFF Set ON when the printed paper curls greatly.
ON
NORMAL Sets the print speed of narrow paper.
MODE1 NORMAL: The print speed is not switched
when printing on narrow paper.
*If temperature adjustment occurs, the
machine operates at low speed until printing
stops.
MODE1: The print speed is switched to low
speed when printing on narrow paper.
Enter the password for the administrator menu.
The default password is "999999."
Sets whether to use the default gateway of the wired LAN or wired
LAN interface.
This item is only displayed when [WIRELESS MODULE] is set to
[ENABLE].
Sets whether to enable or disable wired LAN.
Sets whether to enable or disable the TCP/IP protocol.
Sets whether to enable or disable the NETBEUI protocol.
Sets the method for setting the IP address.
Sets the IP address.
Sets the subnet mask.
Sets the gateway address (default gateway).
0.0.0.0 means that there is no router.
Sets whether to enable or disable DHCPv6.
Sets whether to enable or disable WEB.
Sets whether to enable or disable TELNET.
Sets whether to enable or disable FTP.
Disables IPSec.
78
Description
Description