Printing A Demonstration Page - Microcom 360C Operator's Manual

Printing a Demonstration Page

·
Use cut sheet cut to the following size or continuous paper (roll paper) without a mark.
The operation is not guaranteed for other paper.
When printing on cut sheet
Prepare paper that is 74 mm wide and 210 mm long.
You can print on A4 or LETTER paper that has been cut to a quarter of its long side.
Print after setting [MENUS] > [FEEDER CONFIG] > [PAPER FORM] > [CUT PAPER].
When printing on continuous paper (roll paper)
Prepare continuous paper (roll paper) without a mark that is 74 mm to 86 mm wide.
Print after setting [MENUS] > [FEEDER CONFIG] > [PAPER
FORM] > [CONTINUOUS PAPER] and [MENUS] > [FEEDER
CONFIG] > [CUT TYPE] > [LENGTH].
1
Confirm that [READY TO PRINT] is displayed on the machine.
2
Load the paper.
3
Press «∧» button or «∨» button to display [DEMO PAGE].
4
Press «OK» button.
5
Press «OK» button when [DEMO1/EXECUTE] is displayed.
56