Using Ipp - Microcom 360C Operator's Manual

Using IPP

The machine can be added to a computer as an IPP printer.
When IPP printing is enabled, data can be sent to the machine via the Internet.
• Adding the Machine as an IPP Printer
1
Click [Start], and select [Devices and Printers] > [Add a Printer].
2
Select [Add a network, wireless or Bluetooth printer] in the [Add a Printer] wizard.
3
Select [The printer is not in the list] in the list of available printers.
4
Select [Select the shared printer by name].
5
Enter "http://(The IP address of this machine)/ipp" or "http://(The IP address of this
machine)/ipp/lp," and click [Next].
6
Click [Have Disk].
7
Insert the included "Software DVD-ROM" into a computer.
8
Enter the following value in [Copy manufacturer's files from], and click [Use].
To install the PCL printer driver: "D:¥Drivers¥_PCL"
·
The DVD-ROM drive is set to the D drive in the above example.
9
Select the INF file, and click [Open].
10
Click [OK].
11
Select the model, and click [OK].
12
Click [Next].
13
Click [Complete].
14
When installation is complete, print a test page.
247