Microcom 360C Operator's Manual page 264

5
Select [Enabled] in [Wireless(Infrastructure)] in [Setup].
·
The default setting is [Disabled].
6
Enter the SSID name of the wireless AP to connect to in [SSID].
7
Select [WPA/WPA2-EAP] in [Security] in [Security Settings].
8
When all the basic settings and security settings are complete, click [Submit] on the
bottom left of the Web screen to reflect the settings. It may take up to one minute to
connect to the wireless AP. If the connection fails, reconfigure the wireless settings
from the operation panel again or switch to wired LAN from the operation panel and
reconfigure the wireless settings from the Web page.
263