Figure 3-12 Event Input Detail Page - American Dynamics IP SpeedDome Ultra 8 Configuration And User's Manual

Web Configuration
3 Enter the required Name for the Event Input.
4 Select the required State from the drop down menu. The options are Enabled or Disabled. The
default setting is Disabled.
5 Select the required Active state from the drop down menu. The options are High or Low. The
default setting is Low.
6 Select Done to return to the Main Configuration page.
7 Once the required changes have been made to the IPSDU8 configuration select Save Config
to ensure all changes have been saved. Refer to Procedure 3-18 for more information on
saving configuration changes.
3-18

Figure 3-12 Event Input Detail page

Configuration and User Guide