Procedure 3-8 Selecting A Dome Preset Using The Live Video Page; Procedure 3-9 Defining A Dome Preset Using The Live Video Page - American Dynamics IP SpeedDome Ultra 8 Configuration And User's Manual

Web Configuration
6 To end the pattern, click Stop
7 To keep the new pattern, click Yes, or select No.
8 Click to close the pattern's definition menu.
9 To test the new pattern, select the pattern number and click
10 Click to close the Pattern menu.
11 Click to close the Primary Camera Control menu.
Selecting a Preset

Procedure 3-8 Selecting a dome preset using the Live Video page

1 Click to open the Primary Camera Control menu.
2 Click Preset
3 Select a preset number.
4 Click to move the camera to the preset position.
5 Click to close the Preset menu.
6 Click to close the Primary Camera Control menu.
Defining a Preset

Procedure 3-9 Defining a dome preset using the Live Video page

1 Click to open the Primary Camera Control menu.
2 Position the camera for your preset.
3 Click to display the preset menu.
4 Select a preset number.
5 Click Define Preset
6 When the "Replace preset" message appears, click Yes to program the preset.
The number of available presets is device-dependent.
3-10
. The "Replace pattern" message appears.
to display the preset menu.
to define a preset at this index.
.
Configuration and User Guide