Representation Of Procedural Instructions; Representation Of Warning/General Safety Information - HYDAC FILTER SYSTEMS FCC Operating And Maintenance Instructions Manual

Representation of procedural instructions

There are these two following representations in the case of procedural
instructions:
Procedural instructions with a fixed sequence
Procedural instructions, whose sequence must be complied with without fail
are listed with sequential numbering (1., 2., 3., etc.).
An example for procedural instructions with a fixed sequence:
1. Remove the transport securing device.
2. First fill the product.
3. Switch the product on.
Procedural instructions with a random sequence
Procedural instructions that have a random sequence are listed as bullet
points (-).
An example of a procedural instruction with a random sequence:
- Clean the display
- Rinse the product

Representation of warning/general safety information

All the warning / general safety information in this manual are highlighted with
pictograms and signal words. The pictogram and the signal word indicate the
severity of the danger.
Warning / general safety information is listed before an activity and is laid out
as follows:
HAZARD SYMBOL
FCC
BeWa FCC 3160328g en-us 2019-11-25.docx
SIGNAL WORD
Type and source of danger
Consequence of the danger
►
Measures to avert the danger
en
General
Page 8 / 64
2019-11-25