Table of Contents
Advertisement
Rebooting the unit
The reboot window contains controls that allow you to reboot the Cisco
FM4500 Mobi (in other words, to re-start the unit's operating system).
To reboot the unit, do the following steps:
1.
Click the -reboot link under MANAGEMENT SETTINGS in the
left-hand settings menu.
• The unit reboot dialog will be shown
139)).
Figure 62. Configurator GUI (unit reboot dialog)
2.
Reboot the unit by clicking the YES link. Alternatively, abort the
reboot by clicking the NO link.
• If the YES link was clicked, the unit will reboot.
7.8.8. Logging out
If clicked, the logout option logs the current user off the unit, and out of the
Configurator interface.
•
To log out, click the -logout link under MANAGEMENT
SETTINGS in the left-hand settings menu.
• You will be logged off the unit and out of the Configurator
interface with no further prompting.
• The web browser will show the Authentication Required
dialog
log in again.
Figure 63. Web browser (Authentication Required
dialog)
© 2021 Cisco and/or its affiliates. All rights reserved.
Device configuration using the configurator interface
(Figure 63 (page
139)). If needed, use the dialog to
(Figure 62 (page
Page 139 of 174
Advertisement
Table of Contents
