Table of Contents
Advertisement
1. HAZARDOUS CONDITION WARNINGS
Like all other global technology vendors, Fluidmesh is required to comply
with all local health and government regulations in the locations in which
we operate. This includes meeting radio frequency (RF) exposure limits
for our products.
Our equipment is tested in accordance with regulatory requirements as a
condition to our ability to market and sell in any given jurisdiction. As an
equipment manufacturer, Fluidmesh defers to expert national and
international health organizations responsible for guidance on the safety
of RF signals, specifically the US Food and Drug Administration (FDA),
Health Canada, the World Health Organization (WHO), and other national
and global health agencies.
In May 2019, the FDA stated that there is "no link between adverse health
effects and exposure at or under the current RF energy exposure limit",
and that the current FCC RF exposure limits are sufficient to insure the
safety of users.
If any Fluidmesh hardware unit breaks down or malfunctions, emits smoke
or an unusual smell, if water or other foreign matter enters the unit
enclosure, or if the unit is dropped onto a hard surface or damaged in any
way, power off the unit immediately and contact an authorized Fluidmesh
Networks dealer for assistance.
If you are adjusting and/or controlling a Fluidmesh device using control
software such as the RACER™ interface or the device's local Configurator
interface, do not make configuration changes unless you know with
certainty that your changes will not negatively impact people or animals in
the vicinity of the device and its antennas.
© 2021 Cisco and/or its affiliates. All rights reserved.
HAZARDOUS CONDITION WARNINGS
Page 7 of 174
Advertisement
Table of Contents
