Plug-In Management Procedures; Plug-In Activation - Cisco FM4500 Mobi Installation And Configuration Manual

Plugin
Licensed Available
frequencies
World Available
frequencies
AES Available
Fluidmesh Available
Access
Points
VLAN Available
Virtual Not
Gigabit available
L2TP Available
PROFINET Available
QNET Available
FIPS Available
TITAN Available
UNII2 Available
To purchase any of the software plug-ins, please contact your Fluidmesh
Networks representative.

8.2. Plug-in management procedures

8.2.1. Plug-in activation

The Plug-in management procedure has been standardized, and is the
same for all Fluidmesh hardware devices.
To obtain a plug-in activation code for a Fluidmesh device, do the
following steps:
1. Contact your Fluidmesh Networks representative to purchase a
generic 16-digit License code for plug-in activation.
2. Quote the unique mesh unit identification number (5.a.b.c) of the
Fluidmesh hardware device.
3. Using the Fluidmesh Partner Portal, associate the License code
with the quoted Fluidmesh device to get an Activation code.
4. Enter the Activation code on the MANAGE PLUG-INS window for
the unit.
You can also deactivate a plug-in Activation code that is currently in use
so it can be used with a different Fluidmesh unit. To deactivate an active
plug-in, refer to The PLUGINS
© 2021 Cisco and/or its affiliates. All rights reserved.
FM FM Cisco
FM3200 FM3500
Base Endo
FM
FM3200
Endo
Available Available
Available Available
Available Available
Not Available
available
Available Available
Not Not
available available
Available Available
Available Available
Available Available
Available Available
Available Available
Available Available
sub-tab.
Software Plug-Ins
FM FM
FM4200 FM4500
Fiber Fiber
FM FM
FM4200 FM4500
Mobi Mobi
Available Available
Available Available
Available Available
Not Not
available available
Available Available
Not Not
available available
Available Available
Available Available
Available Available
Available Available
Available Available
Available Available
Page 146 of 174
FM 4800