LINK and RX/TX LEDs
The LINK and RX/TX LEDs indicate the current state of the PROFINET IO interfaces.
Table 3- 3
Possible states of the LINK and RX/TX LEDs
LED
LINK
RX/TX
Lit
Irrelevant
Irrelevant
Flashes
6 Hz
Note
The LINK and RX/TX LEDs are located directly next to the sockets of the PROFINET IO
interfaces. They are not labeled.
REDF LED
The REDF LED indicates specific system states and redundancy errors.
REDF LED
System state
Flashes
Link-up
0.5 Hz
Flashes
Update
2 Hz
Dark
Redundant (CPUs are redundant)
Lit
Redundant (CPUs are redundant)
CPU 410-5H Process Automation/CPU 410 SMART
System Manual, 09/2014, A5E32631667-AB
Meaning
Connection at the PROFINET IO interface is active
Receiving or sending data at the PROFINET IO interface.
Structure of the CPU 410-5H
3.3 Status and error displays
Basic requirements
-
-
No redundancy error
There is an I/O redundancy error:
Failure of a DP master, or partial or total failure of a
•
DP master system
Failure of a PN IO subsystem
•
Loss of redundancy on the DP slave
•
Loss of redundancy at the PN IO device
•
Loss of redundancy on the DP slave/slave failure
•
Loss of redundancy at the PN IO device/device
•
failure
41