Siemens SIMATIC PCS 7 System Manual page 22

Introduction to CPU 410-5H
2.1 Scope of application of PCS 7
PCS 7 applications
You create a PCS 7 project on an engineering station (ES for short). A variety of applications
are available on the ES:
● SIMATIC Manager – the central application of PCS 7. From here you open all other
applications in which you must enter settings for the PCS 7 project. You will set up your
entire project from SIMATIC Manager.
● HW Config – configuration of all hardware of a system, e.g., CPUs, power supply,
communications processors.
● CFC editor and SFC editor - creation of continuous function charts (CFC) and sequential
control systems.
● PCS 7 OS in conjunction with various editors - Implementation of OS configuration.
Every application has a graphic user interface for easy operation and clear representation of
your configuration data.
Important information on configuration
Open equipment
Risk of death or serious injury.
S7–400 modules are classified as open equipment, meaning you must install the S7–400 in
an enclosure, cabinet, or switch room that can only be accessed by means of a key or tool.
Only instructed or authorized personnel are permitted to access these enclosures, cabinets,
or switch rooms.
Additional information
The components of the standard S7-400 system, e.g., power supplies, I/O modules, CPs,
and FMs, are also used in the high availability S7-400H automation system. For a detailed
description of all hardware components for S7-400, refer to Reference Manual
Automation System, Module Data
The rules governing the design of the user program and the use of function blocks laid down
for the S7-400 standard system also apply to the fault-tolerant S7-400H automation system.
Refer to the descriptions in Manual
System Software for S7-300/400; Standard and System Functions
See also
Overview of the parameters for the CPU 410-5H (Page 46)
AS 410 modular systems
(http://support.automation.siemens.com/WW/view/en/77430465/130000)
22
WARNING
.
Programming with STEP 7
CPU 410-5H Process Automation/CPU 410 SMART
S7-400
and Reference Manual
.
System Manual, 09/2014, A5E32631667-AB