Motion Tolerance; Figure 8: Barcode Moving Vertically; Figure 9: Barcode Moving Horizontally - Opticon F-100 SR Specification Manual

SPECIFICATIONS MANUAL
F-100 SR
1st
8.9

Motion Tolerance

When scanning barcodes that are moving vertically as shown in figure 8, the scanner usually has
almost the same performance as when it is reading non moving barcodes. The scanning performance
is only reduced when a barcode is moved at very high speed or when the height of the barcode is very
small.
t

Figure 8: Barcode moving vertically

However, when scanning barcodes that are moving horizontally as shown in figure 9, the scanning
performance will be reduced rapidly at increasing speed. Therefore, make sure to stop the barcode for
a brief moment when the barcode is aligned at the center of the scanner.

Figure 9: Barcode moving horizontally

Note: When scanning barcodes on moving items as described above, scanning performance may decline rapidly,
depending on operating conditions.
13