Table of Contents
Advertisement
5
Detailed View
5.1
Detailed View
No.
Name
1
Scan key
2
Status LEDs
3
Scan Window
4
Mounting holes
SPECIFICATIONS MANUAL
Figure 1: Detailed View of F-100 SR
By pressing this key, the scanner starts reading barcodes.
Pressing for more than 5seconds, the scanner shifts to read rate mode.
Ends by pressing key again or inputting trigger signal.
Indicates reading result and USB communication status.
In read rate mode, the read rate is indicated by these 3-color LEDs. Refer
to section 5.2 for details.
Light paths of the imager and LED illumination. Ensure that the lens is free
from dust and dirt before scanning.
Screw holes that can be used to mount the scanner. Screw hole is M3,
maximum depth is 4mm and tightening torque is 0.5 Nm.
②
①
③
④
Description
F-100 SR
1st
5
Advertisement
Table of Contents
