Table of Contents
Advertisement
16. Tighten the toggle screws using a
= 24 mm wrench crosswise with 85 Nm.
17.
Open the locking features to the INLET and
OUTLET.
Switch the pump on and fill the filter
housing.
18. Unscrew the air bleed screw in the cover.
As soon as oil escapes, screw in the air
bleed screw by hand and tighten it firmly.
19. The filter housing is now ready.
MRF4
MoWa MRF4 3214670d en-us 2018-02-09.docx
en(us)
Performing maintenance
Page 29 / 36
2018-02-09
Advertisement
Table of Contents
Need help?
Do you have a question about the MRF4 and is the answer not in the manual?