Configuring Opc Ua Settings; Master Configuration - Danfoss VLT MCD 600 Installation Manual

PROFINET Card
Installation Guide

4.3.3.2 Configuring OPC UA Settings

Procedure
1.
Connect to the web server and click Configuration.
2.
Select OPC UA Server.
3.
Tick the Enable checkbox to enable OPC UA client operation.
The OPC UA client is enabled by default.
4.
Click Server Configuration and configure the settings as required.
5.
Select Actions to select the actions for different object instances.
6.
Click Submit to save all settings in the card.

4.4 Master Configuration

Import the latest GDSML file into the Master configuration tool. This file is available from the website. SSPM_N.bmp indicates nor-
mal mode. SSPM_D.bnp indicates diagnostic mode.
Danfoss A/S © 2020.12
Device Configuration
AN353424578485en-000101 / 130R0947 | 13