Adding A User; Deleting A User; Configure Iot Settings - Danfoss VLT MCD 600 Installation Manual

PROFINET Card
Installation Guide

4.3.2.1 Adding a User

2
3
Procedure
1.
Connect to the web server and click Administration.
2.
Click Create new user.
3.
Enter the new username and password.
4.
Click Create an account.
5. Set privileges (user, supervisor, administrator) as appropriate.
6.
Click Save changes.

4.3.2.2 Deleting a User

Procedure
1.
Connect to the web server and click Administration.
2.
Select the required entry in the user list and click Delete.
3.
Click Delete again to confirm the action.

4.3.3 Configure IoT Settings

The PROFINET Card supports soft starter status monitoring via IoT. The card cannot control or program the soft starter.
Version 2.x of the PROFINET Card does not support IoT operation.
Danfoss A/S © 2020.12
1
4
N O T I C E
5
6
AN353424578485en-000101 / 130R0947 | 11
Device Configuration