Energy Efficiency - AEG BSE774320M User Manual

Problem
There is dirty water on the
bottom of the cavity after the
descaling cycle.
The cleaning function is in‐
terrupted before it finishes.
The cleaning function is in‐
terrupted before it finishes.
There is no good perform‐
ance of the cleaning proce‐
dure.
13.2 Service data
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
The necessary data for the service
centre is on the rating plate. The rating
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

14. ENERGY EFFICIENCY

14.1 Product Information and Product Information Sheet*
Supplier's name
Model identification
Energy Efficiency Index
Energy efficiency class
Energy consumption with a standard load, conven‐
tional mode
Possible cause
The grill- / roasting pan is on
a wrong shelf position.
There was a power cut.
The function was stopped by
the user.
You did not remove the side
grids before the start of the
cleaning procedure. They
can transfer heat to the walls
and decrease the perform‐
ance.
plate is on the front frame of the oven
cavity. Do not remove the rating plate
from the oven cavity.
.........................................
.........................................
.........................................
Remedy
Remove the residual water
and the descaling agent
from the bottom of the oven.
Put the grill- / roasting pan
on the first shelf position.
Repeat the procedure.
Repeat the procedure.
Remove the side grids from
the appliance and repeat the
function.
AEG
BSE774320M 944187889
BSK774320M 944187875
81.2
A+
1.09 kWh/cycle
ENGLISH 51